|
Village of Random Lake Ordinance
CHAPTER 17 - ZONING CODE
17.031 SINGLE-FAMILY DWELLING STANDARDS (Cr.Ord. #8-01).
No single-family dwelling, including dwellings, constructed on the building
site, manufactured dwellings and manufactured homes, shall be erected
or installed in any zoning district except the MHP District unless such
dwelling meets all of the following standards:
- The dwelling shall be set on a full basement or other permanent enclosed
structure in accordance with the State Uniform Dwelling Code.
- The dwelling shall have a minimum width of 24 feet and core area
of living space at least 24 feet by 24 feet.
- The dwelling shall have a pitched roof with a minimum slope of 3
inches of rise in 12 inches of run, and eaves extending beyond the
nearest vertical wall a minimum of 12 inches. The roofing shall
be asphalt shingles or comparable roofing.
(4) In addition each dwelling is required to select features from
the following list:
- Offset or stagger the front wall plane by at least two feet. This
does not include the garage wall or a recessed entry.
- Garage offset at least 2’ behind front wall of dwelling
- Side loading garages that are at least 45o offset from front wall
of living quarters with windows compatible to front elevation of
house.
- Covered front entry/porch 5’ x 12’ or larger with architectural
treatments, i.e.; railings, posts etc.
- Main roofline to be at least 5:12 pitch
- Roof dormers on 5:12 or greater, pitched roof.
- 1- 1/2 –story dwelling with dormers.
- 2’ overhang at ends of rafters/trusses and 1’ overhang
on gables.
- Minimum of 3 - 1/2” trim around all doors and windows.
- Heavy textured dimensional roofing material
- Natural products or masonry products on at least 25% of the walls
and recessed areas of the front elevation.
- From of dwelling not including garage must include 25% glass
|
|
